RAMBO 1U Spec:
Processor
• Dual PGA462 ZIF sockets
• Supports up to two AMD Athlon
MP Processors
• Two onboard VRMs
• System bus support for 200MHz
and 266MHz
Chipset
• AMD-760 MP chipset
• AMD-762 north bridge and
AMD-766 south bridge
• Winbond W83627HF Super I/O
ASIC
Memory
• Four 2.5v 184-pin DDR DIMM
sockets
• 25-degree angled sockets
enable rackmount installation
• Supports up to 3GB of PC2100
Registered
DDR RAM
• Supports ECC (72-bit) memory
modules
Expansion Slots
• One AGP Pro slot; also
supports 4x AGP
• Five 64/32-bit 33MHz (5-volt)
PCI slots
• Total of six usable slots
Integrated I/O
• One floppy connector supports
up to two drives
• One 9-pin 16550-based serial
port
• One 25-pin SPP/ECP/EPP
parallel port
• Four USB ports (two via
optional cable)
• PS/2 keyboard and mouse ports
Integrated PCI IDE
• Dual-channel master mode
• Up to four Enhanced IDE
devices
• Support for ATA-100/66/33 IDE
and ATAPI compliant
devices
Integrated SCSI (manufacturing
option)
• Adaptec AIC-7899W controller
• Dual-channel Ultra160 SCSI
support
• 160MB/sec maximum data
throughput per channel
• Supports up to 15 LVD SCSI
devices per channel
Integrated LAN
• Two 3Com 3C920 LAN
controllers
• 10/100Mbps data transfer rate
per controller
Integrated 2D/3D Graphics
• ATI RAGE XL graphics
controller
• 4MB frame buffer (SDRAM)
• Standard 15-pin analog VGA
port
Server Management (OEM option)
• Supports the Intelligent
Platform Management Interface
(IPMI)
• Q-Logic Zircon Baseboard
Management Controller (BMC)
• Support for IPMI, SDR, SEL,
FRU
• I 2C
and IPMB
Hardware Monitoring
• Winbond W83782D hardware
monitoring ASIC
• 3-pin fan monitoring headers
• CPU temperature and voltage
monitoring
BIOS
• Phoenix BIOS on 4Mb Flash ROM
• Supports APM v1.2 and ACPI
v1.0
• User settings for hardware
monitoring
• Auto-configuration of IDE
hard drive types
• Multiple boot options
• DMI 2.0 compliant
Form Factor
• Extended ATX footprint (13" x
12", 330.2mm x 304.8mm)
• One 24-pin and one 8-pin
power connectors
• Stacked parallel (one),
serial (one) and VGA (one) ports
• Stacked USB (two) ports
• Side-by-side LAN (two) ports
• Stacked keyboard and mouse
ports
Regulatory
• FCC Class B (Declaration of
Conformity) certified
• European CE (Declaration of
Conformity) certified
|
[my_html/photogallery/photo19801/real.htm]
RAMBO 2U Spec:
Processor
• Dual PGA462 ZIF sockets
• Supports up to two AMD Athlon
MP Processors
• Two onboard VRMs
• System bus support for 200MHz
and 266MHz
Chipset
• AMD-760 MP chipset
• AMD-762 north bridge and
AMD-766 south bridge
• Winbond W83627HF Super I/O
ASIC
Memory
• Four 2.5v 184-pin DDR DIMM
sockets
• 25-degree angled sockets
enable rackmount installation
• Supports up to 3GB of PC2100
Registered
DDR RAM
• Supports ECC (72-bit) memory
modules
Expansion Slots
• One AGP Pro slot; also
supports 4x AGP
• Five 64/32-bit 33MHz (5-volt)
PCI slots
• Total of six usable slots
Integrated I/O
• One floppy connector supports
up to two drives
• One 9-pin 16550-based serial
port
• One 25-pin SPP/ECP/EPP
parallel port
• Four USB ports (two via
optional cable)
• PS/2 keyboard and mouse ports
Integrated PCI IDE
• Dual-channel master mode
• Up to four Enhanced IDE
devices
• Support for ATA-100/66/33 IDE
and ATAPI compliant
devices
Integrated SCSI (manufacturing
option)
• Adaptec AIC-7899W controller
• Dual-channel Ultra160 SCSI
support
• 160MB/sec maximum data
throughput per channel
• Supports up to 15 LVD SCSI
devices per channel
Integrated LAN
• Two 3Com 3C920 LAN
controllers
• 10/100Mbps data transfer rate
per controller
Integrated 2D/3D Graphics
• ATI RAGE XL graphics
controller
• 4MB frame buffer (SDRAM)
• Standard 15-pin analog VGA
port
Server Management (OEM option)
• Supports the Intelligent
Platform Management Interface
(IPMI)
• Q-Logic Zircon Baseboard
Management Controller (BMC)
• Support for IPMI, SDR, SEL,
FRU
• I 2C
and IPMB
Hardware Monitoring
• Winbond W83782D hardware
monitoring ASIC
• 3-pin fan monitoring headers
• CPU temperature and voltage
monitoring
BIOS
• Phoenix BIOS on 4Mb Flash ROM
• Supports APM v1.2 and ACPI
v1.0
• User settings for hardware
monitoring
• Auto-configuration of IDE
hard drive types
• Multiple boot options
• DMI 2.0 compliant
Form Factor
• Extended ATX footprint (13" x
12", 330.2mm x 304.8mm)
• One 24-pin and one 8-pin
power connectors
• Stacked parallel (one),
serial (one) and VGA (one) ports
• Stacked USB (two) ports
• Side-by-side LAN (two) ports
• Stacked keyboard and mouse
ports
Regulatory
• FCC Class B (Declaration of
Conformity) certified
• European CE (Declaration of
Conformity) certified
t wisi enim ad minim veniam, quis nostrud exerci taion
ullamcorper suscipit lobortis nisl ut aliquip ex en commodo consequat.
Duis te feugifacilisi per suscipit lobortis nisl ut aliquip ex en commodo
consequat.Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed
diem nonummy nibh euismod tincidunt ut lacreet dolore magna aliguam erat
volutpat. |