Characteristics
Type of receiver |
Combined GPS / GLONASS receiver
|
Navigation Features |
The satellite receiver can determine its position under the following conditions:
|
Type of antenna |
40 dB GPS L1/GLONASS
L1
Datasheet GLONASS/GPS Antenna |
Status info |
Status info by 4 LED light indicators (2mm light pipes)
|
Synchronization time |
Max. 1 minute in normal operation mode, approx. |
Frequency outputs |
Frequency output 10 MHz, TTL level |
Pulse outputs |
3 Programmable TTL outputs, per default configured as: |
Accuracy of pulse outputs |
Depends on oscillator option: |
Interface |
Single serial RS232 interface |
Data format of interfaces |
Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud |
Statusbyte |
Information about free running mode, daylight savings time and DST pre-switch announcement, synchronization since last reset, GMT/UTC time and validity of the hardware clock data |
Unmodulated time code output |
DCLS, TTL into 50 ohm (active high or active low) |
Modulated time code output |
IRIG AM sine wave signal: |
Generated time codes |
IRIG B002: 100pps, DCLS signal, no
carrier, BCD time of year |
Time-Trigger inputs |
Resolution: 100 nsec, triggered by falling TTL slope |
Electrical connectors |
SMA connector for antenna |
Network interface |
RJ-45 10/100/1000 GbE/s port |
Backup battery type |
When main power supply fails, hardware clock runs free on
quartz basis, almanac data is stored in RAM |
Bus type |
PCI Express high speed data bus |
Ambient temperature |
0 ... 50°C / 32 ... 122°F |
Humidity |
Max. 85% |
Warranty |
One-Year Warranty |
Options |
Oscillator upgrade:
|
RoHS-Status of the product |
This product is fully RoHS compliant |
Physical Dimension: |
17.5” Depth x 1U/2U (1.75”/3.3” 2U Height x 19” Width |
E-mail: sales@cepoint.com.